Cannons UK Flatline Fleck 2nd Edition Rubber Gym Flooring – 1m × 1m × 20mm
| Depth: | 20mm |
|---|---|
| Length: | 1m |
| Width: | 1m |
| Buy more, save more! | |
|---|---|
|
Buy 8-19
£37.99 each
5.0% off
|
|
|
Buy 20-49
£36.99 each
7.5% off
|
|
|
Buy 50-99
£35.99 each
10.0% off
|
|
|
Buy 100+
£34.99 each
12.5% off
|
|
Check out safely using your preferred payment method
Frequently bought together
Flatline Fleck 2nd Edition Rubber Gym Flooring – 20mm
Flatline Fleck builds on the standard 20mm Flatline PRO tile with an EPDM rubber top layer. The flecked finish adds colour to your gym floor and makes routine cleaning easier than with the standard Flatline PRO surface.
Choose your fleck colour
Available in Blue, Red, Yellow and White fleck options for home gyms, PT studios and commercial training spaces.
Plan your layout
Each tile measures 1m × 1m × 20mm and covers 1m². A 4m × 3m area needs 12 tiles before allowing for cuts. For areas where loaded barbells are regularly dropped, choose protection suited to the subfloor and the way you train.
Fitting and cleaning
The tiles lay edge to edge without interlocking. Loose laying may suit some layouts on a clean, dry, level subfloor. Check the Rubber Tile Installation Guide (PDF) before fitting to see whether adhesive is recommended for your setup.
Sweep or vacuum loose grit and dust, then damp mop the EPDM surface with a suitable mild cleaner. Wipe up spills promptly, avoid soaking the tiles and let the floor dry before use.
Free UK Mainland Delivery
Free delivery is available on orders over £99.99, subject to postcode exclusions. Some areas of Scotland incur a surcharge, which is shown at checkout.
Next Working Day Delivery
Order in-stock items before 1pm Monday to Thursday, or 12pm on Friday, for next working day delivery to eligible UK mainland addresses. This service is not guaranteed and excludes weekends and bank holidays.
If you need delivery to Northern Ireland, offshore islands or an international destination, please contact us before ordering for delivery availability and prices. Email sales@cannonsuk.com or call 01379 687768.
What makes Flatline Fleck different from Flatline PRO?
It uses the same underlying construction as the standard 20mm Flatline PRO tile, with an EPDM rubber top layer for a flecked finish and easier routine cleaning.
How much does each tile cover?
Each 1m × 1m tile is 20mm thick and covers 1m².
What colours are available?
Choose Blue, Red, Yellow or White flecks.
Do the tiles interlock or need adhesive?
The tiles lay edge to edge without interlocking. Loose laying may suit some layouts on a clean, dry, level subfloor. Check the Rubber Tile Installation Guide (PDF) before fitting to see whether adhesive is recommended for your setup.
Can I use the tiles under gym equipment?
The tiles are suitable under racks, benches and cardio equipment on a suitable level subfloor. Small equipment feet can leave indentations. For repeated barbell drops, consider dedicated protection for the lifting area.
How do I clean the surface?
Sweep or vacuum loose grit and dust, then damp mop the EPDM surface with a suitable mild cleaner. Wipe up spills promptly, avoid soaking the tiles and let the floor dry before use.
Are bulk discounts available?
Yes. Bulk discounts start at 8 tiles. See the pricing table for the current rates.
What if my tiles arrive damaged or faulty?
Email sales@cannonsuk.com with your order details and photos where possible.
Flatline is not your average rubber flooring.
Reach Certified (no nasty chemicals) Click here for more details
VOC tested (no chemical smells) Click here for more details
Impact & sound insulation test (stop noise complaints) Click here certificate
Factory CE approved Click here for more details
ISO 9001 : 2015 Click here for more details
EN ISO 5470 : 2001 (resistance to abrasion) Click here for certificate
ISO 14001:2015 (Environmental management) Click here for more details
ISO 45001:2018 (Health and safety) Click here for more details
Cleaning the EPDM surface
Sweep or vacuum loose grit and dust, then damp mop the EPDM surface with a suitable mild cleaner. Wipe up spills promptly, avoid soaking the tiles and let the floor dry before use.
Look after the tiles
Lift equipment when moving it rather than dragging it across the floor. Check for movement, gaps or damaged edges, especially in busy areas.
At a glance
- Size: 1m × 1m × 20mm
- Coverage: 1m² per tile
- Construction: Flatline PRO base with an EPDM rubber top layer
- Fleck colours: Blue, Red, Yellow or White
- Fitting: Non-interlocking, laid edge to edge
Reaction to fire: Fs <150 mm in 20 seconds (ISO11925)
Impact sound insulation: 26 dB (ISO 10140)
Airborne sound insulation: 48 db (ISO 10140)
|
Usage Area: |
Indoor Area |
|
Dimension: |
100x100 cm (tolerance +/- 0.5%) |
|
Thickness: |
17 mm SBR + 3 mm EPDM Flecks |
|
Color Options: |
Black + Red / Green / Blue / Yellow / Grey EPDM flecks |
|
Top Surface: |
Porous, Soft, Smooth |
|
Bottom Surface: |
Straight, with drainage channel |
|
Density: |
950-980 kg/m3 |
|
Weight/m2: |
18 kg (20 mm) |
|
Hardness: |
60 ± 3 Shore A |
